|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Convertible Top
|
 |
|
|
|
|
|
|
|
|
|
|
|
Cut down bow width.
|
|
|
The boat was measured for width. Each top support was disassembled into the two side legs and the center bow. The center bow piece had 10 inches removed from each end, then the side legs reattached. In the picture the large top support is the original size, the smaller one has been cut down and the corner bends have been tightened with the conduit bender. The two 10 inch sections are near the top of the bow.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
