home | shopping | contact | projects | login|join
     Pedal stops       
Search Projects:
 
Share Thumbnails Slideshow Tutorial

Pedal stops
Submitted By: fixb52s
Date Created: 06-16-2007
Description: The cart only came with one pedal stop. These are not avalable from Manco anymore, so a new one for the brake pedal must be made.
Related Projects: Manco Dingo Go Cart
    Tear down
    Frame restoration
    (Pedal stops)
    Engine
    Reassembly
    Rear axle
    Floor mat
    Tires


Raw material
The stop is made from a piece of angle stock. After the shape is traced onto the stock, it is cut with a Dremel with heavy duty cutoff wheels.

The bracket is cut, and needs some minor shaping with a grinder and file. The hole for the bolt is marked and drilled. After final shaping, it is sanded down and painted.
Cut out


Done
The stop is used on the brake pedal, and the original is used on the throttle.

All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog