home | shopping | contact | projects | login|join
     Fat Mini-Apes       
Search Projects:
 
Share Thumbnails Slideshow Tutorial

Fat Mini-Apes
Submitted By: kpreese
Date Created: 02-12-2006
Description: I can tolerate the throttle/idle cables, the brake line and the clutch cable, but the wires for the hand switches make the handlebars look a bit sloppy. The fat bars are 1-1/4" diameter and look MUCH better along with allowing the wires to be run internally.

It is a bit of work, but well worth it. I also installed Alloy Arts "Good n' tites" riser bushings while at it and I HIGHLY recommend them. They nearly elminate the flexing of the bars on the top triple tree clamp without noticably increasing vibration.
Related Projects: H-D 2006 FXDBI Street Bob
    Lighting updates (run/turn/brake controller, LED blinkers and tail light)
    Tachometer
    License Mount
    (Fat Mini-Apes)
    Horn Cover
    Garage Door Opener
    New Exhaust
  Displaying 1 - 9 of 15 Next >>

Stock bars

Stock bars again

Closer shot of the right hand controls and wire loom

Tank, dash and seat

Picture of the bike with tank removed

Locate the connectors for both left and right switch sets

Disassemble the connectors

Remove wires and sockets

Remove all hand controls and switch housings
  Displaying 1 - 9 of 15 Next >>
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog