|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
1648 G3 mod
|
 |
|
|
|
|
|
|
|
|
|
|
|
Aft bench
|
|
|
The aft bench seat on this rig was made from .063 aluminum, and what gave it the rigidity from the factory was the flotation foam inside. However, the foam had settled in the years the boat had been used, so the seat had a significant sag in the middle. Furthermore, multiple seat bases had been installed (and poorly so), leaving a swiss cheesed surface. Therefore, I braked a set of flanges in a piece of sheet aluminum, and covered the seat with it, which gave it rigidity, and a clean surface.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
