|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Alumacraft 1648 Mod
|
 |
|
|
|
|
|
|
|
|
|
|
|
New ribs.
|
|
|
There are no factory ribs underneath the bench seats. Therefore, I have to make replacements. These are simply made from aluminum tube, with sheet stitch welded on, to form the riveting flange. Welding the ribs right to the thin bottom of the boat (riveted boats tend to run a good bit thinner than welded jon boats), would cause too much distortion, and mess up the shape of the boat. The rib can be built benchtop, clamped to a strongback, then merely riveted in, without stressing the boat.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
