|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Alumacraft 1648 Mod
|
 |
|
|
|
|
|
|
|
|
|
|
|
Benches removed.
|
|
|
Removing the rivets is done simply by using a sanding disk on a 4.5" angle grinder to sand the rivets flush, then using a hammer and pin punch to knock them out. This doesn't egg out the hole as drilling rivets out often does, and will allow the same size replacement rivets to be used, as opposed to stepping up a size, which won't match the rest of the factory rivets.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
