|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Permanent Fuel Tank
|
 |
|
|
|
|
|
|
|
|
|
|
|
Platform
|
|
|
Trial fitting the tank platform. The tank is just a 1/2" too long to fit in front of the lip of that little bulkhead. To get around that problem a raised platform was made from pressure treated 2x4 and 1/2" plywood. The hull is a little wider at the raised height allowing the fuel tank to be moved forward and totally clear the bulkhead. This is important because I may add a full compartment wall to hide the view of the fuel tank and it will rest just in front of the bulkhead. Moving the tank forward an inch gives that needed clearance. The plywood was attached to the 2x4's with water proof construction adhesive and a few screws to hold everything in line while drying.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
