|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Permanent Marine Fuel Tank
|
 |
|
|
|
|
|
|
|
|
|
|
|
Fitting Valve
|
|
|
A 1" spacer block was made by gluing up 2 piecesof 1/2" pressure treated ply. The block keeps the valve handle from sticking out too far. Again,this is looking straight up under the transom cap. The line on the right is from the fuel tank, the line goind down goes to the filter, and the barb on the left will have a Johnson male portable fuel tank connector on it for connecting a 6 gallon portable if extra fuel capacity is needed. All hoses will get hose clamps after final fitting.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
