|
|
 |
|
| home |
| |
shopping |
| |
contact |
| |
projects |
| |
Warning: Undefined array key "session_logged_in" in /home2/sap/public_html/header.php on line 612
login | | | join |
|
|
|
|
Permanent Marine Fuel Tank
|
 |
|
|
|
|
|
|
|
|
|
|
|
Enough space for hose and clamp
|
|
|
This view from below shows that the hose barb is close to the splashwell, but still enough space for the fuel hose and a clamp and still not touch the splashwell. The 90* fitting is just hand tight, so it will be lower after tightening with a wrench, and if more clearance is needed, the bottom of the splashwell can be ground away right over the hose barb. There is 1/2" plywood core in the splashwell so there is material to work with.
|
|
|
|
|
|
|
|
|
All projects on Shareaproject.com are user-submitted and should be used for reference information only. The projects are not intended to be complete "How-To" articles. Use the information contained in these projects at your own risk. Projects are not checked for completion, accuracy, or safety and therefore cannot be guaranteed in any way.
Outdoor Blog
|
